2-6mm Clean

Use:
Decorative chippings for gardens and paths. Bedding layer for permeable paving. Also an ideal decorative aggregate for topping off pots and planters.
4-10mm Clean

Use:
Chippings for footpaths, flat roofs and pipe bedding. Produced to BSEN1260 / BSEN13242
10-20mm Clean

Use:
Chippings for footpaths, driveways and pipe bedding. Does not roll around like rounded gravel. Produced to BSEN1260 / BSEN13242
5-20mm Clean

Use:
Concrete mixes, pipe bedding and drainage
20-40mm Clean

Use:
Drainage stone, pipe bedding and filter media
40-75mm Clean

Use:
Drainage stone, general bulk fill and hard standings
80-200mm Clean (Gabion)

Use:
Stabilisation and control of earthworks and river works when used in Gabion baskets.
40mm Crusher Run

Use:
Capping sub formation Prior to laying MOT type 1 sub-base. Farm roads and fill material under concrete. Not made to a specification so dust content will vary.
Mot Type 1 Sub-Base

Use:
Sub-base to full Ministry of Transport Specification for Highway Works. Can be left exposed or covered with asphalt or concrete
Type 1x

Use:
Free draining Sub-Base with low -5mm content. Used under permeable paving such as Marshalls Priora and Hanson Aquaflow.
Type 3

Use:
Low fines sub-base with less -63micron content than MOT Type 1, used for permeable paving applications such as Marshalls Priora and Hanson Aquaflow.
6F5 Capping Layer

Use:
Capping sub formation prior to laying MOT type 1 sub-base. Available from quarried or recycled aggregates
Self-Binding Pathmix

Use:
0-10mm self-binding path mix is used to make a decorative path or yard. It compacts to form a solid and decorative base for both domestic and commercial properties.
We deliver Limestone to the following towns and their surrounding areas including Bedale, Boroughbridge, Catterick, Easingwold, Harrogate, Helmsley, Knaresborough, Leeming, Leyburn, Malton, Masham, Northallerton, Pickering, Richmond, Ripon, Scarborough, Tadcaster, Thirsk, Wetherby and York.